Coil Spring Isolator Proper Installation

Thursday, June 23, 2011 | comments (1)

Just today, a box has been delivered in your house here in Philadelphia, Yes, the part I ordered from one of auto parts store on the internet.  The coil spring isolator of my Silverado was damaged and hence I needed to replace it. Not a tough job. Actually it would only take 1 and a half hour. First off, here are the things you should have:

Floor Jack
2 Jack Stands
5/8" Combination Wrench
19mm Socket and Socket Wrench
3 6" 2"x4" Blocks
2 8" 2"x4" Blocks
Large Hydraulic Jack
Small Hydraulic Jack
Tire Iron or Impact Wrench with 3/4" Socket


I recommend getting a Westar Coil Spring Isolator because the quality of this brand is really different from others.
  1. You can start the installation by unpacking the box and organizing the things that you will need such as the above mentioned.
  2. Next step is to park your car in a safe place, much better if it is on your own garage. Then, start removing the wheel by placing a jack underneath. Now you can remove the bearings as well as the wheels. Start by turning the jack higher until it reached the right height. Once remove, install the coil isolator and make sure they are properly fitted.
  3. Once done, you can start lowering the jack and test if it is ok. 

Grille Assembly: Attraction Plus Protection

| comments

From the word, grill, grille assembly is one of the features attached on your car. It can be found at the end of the front body, where the emblem is being placed and seen. However, this isn’t just a simple accessory. Instead, it has a main function and that is to protect the inner parts from several factors such as road objects, rain and other objects that can cause interior issue. It also controls too much heat from entering the engine. As time passes, grilles got damaged by several factors mentioned above and definitely, you should replace this part if that thing happens. Or else, it would result to a huge issue. 

In today’s advanced world, there are a lot of designs that you could choose from and I highly recommend getting a Westin Grille Assembly. What are the qualities this brand possessed that you can’t see with others? Well, first of all this is fantastic since it adds attraction to your car. Add to that, Westin grilles are made from the finest materials like light metals, plastic and other quality stuff that are capable of protecting the inner parts of your car.  Besides, they are much cheaper compare to other brands that are out in the market. You can choose the color that best fit for your auto. 

There are a lot of designs as well plus you can customize the grille as you wish. Always remember to check the manufacturer part before getting one. If you may not know, there are a lot of scams on the net today and as much as possible you need to avoid this and prevent from too much waste of money.

Other topics: Car parts

Window regulator kit- Repairing Car's power windows

Sunday, June 19, 2011 | comments


As you're driving down the turnpike and approaching the tollbooth, you reach for the switch to lower your window and nothing happens. The switch moves but the window does not budge. Not even a noise from the window motor can be heard which strongly suggests to you that the device is not functioning. You must stop your car and open up the door to pay the attendant before continuing on your trip. Thoughts of an expensive car repair bill are dancing through your head, putting you in a foul mood and tempering the anticipated fun of your getaway weekend. Don't despair: you can repair the power window yourself and save a bundle over expensive dealership charges. Let's take a look at the steps you can take to fix the problem yourself and save a lot of cash in the process.

Before assuming that the window regulator must be replaced you should first rule out the possibility of dirty electrical contacts. On most cars the main power for all switches goes through the master switch located at the driver's console. Sometimes the switch is dirty causing the window to malfunction. If this is the case, take the necessary steps to clean the contact and your problem should be resolved.
 
Copyright © 2011. Automotive Blog - All Rights Reserved
Proudly powered by Blogger